Contract 0xe569D45803C76A6651f466f6b16DA4C8705d4257 8

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;

import "../../libs/BaseContract.sol";
import "../../rango/bridges/multichain/IRangoMultichain.sol";
import "./RangoMultichainModels.sol";
import "./MultichainRouter.sol";

/// @title The root contract that handles Rango's interaction with MultichainOrg bridge
/// @author Uchiha Sasuke
/// @dev This is deployed as a separate contract from RangoV1
contract RangoMultichain is IRangoMultichain, BaseContract {

    /// @notice Notifies that some new router addresses are whitelisted
    /// @param _addresses The newly whitelisted addresses
    event MultichainRoutersAdded(address[] _addresses);

    /// @notice Notifies that some router addresses are blacklisted
    /// @param _addresses The addresses that are removed
    event MultichainRoutersRemoved(address[] _addresses);

    /// @notice An event showing that a MultichainOrg bridge call happened
    /// @param _actionType The type of bridge action which indicates the name of the function of MultichainOrg contract to be called
    /// @param _fromToken The address of bridging token
    /// @param _underlyingToken For _actionType = OUT_UNDERLYING, it's the address of the underlying token
    /// @param _inputAmount The amount of the token to be bridged
    /// @param multichainRouter Address of MultichainOrg contract on the current chain
    /// @param _receiverAddress The address of end-user on the destination
    /// @param _receiverChainID The network id of destination chain
    event MultichainBridge(
        RangoMultichainModels.MultichainBridgeType _actionType,
        address _fromToken,
        address _underlyingToken,
        uint _inputAmount,
        address multichainRouter,
        address _receiverAddress,
        uint _receiverChainID
    );

    /// @notice List of whitelisted MultichainOrg routers in the current chain
    mapping(address => bool) public multichainRouters;


    /// @notice The constructor of this contract that receives WETH address and initiates the settings
    /// @param _nativeWrappedAddress The address of WETH, WBNB, etc of the current network
    constructor(address _nativeWrappedAddress) {
        BaseContractStorage storage baseStorage = getBaseContractStorage();
        baseStorage.nativeWrappedAddress = _nativeWrappedAddress;
    }

    /// @notice Enables the contract to receive native ETH token from other contracts including WETH contract
    receive() external payable { }

    /// @notice Adds a list of new addresses to the whitelisted MultichainOrg routers
    /// @param _addresses The list of new routers
    function addMultichainRouters(address[] calldata _addresses) external onlyOwner {
        for (uint i = 0; i < _addresses.length; i++) {
            multichainRouters[_addresses[i]] = true;
        }

        emit MultichainRoutersAdded(_addresses);
    }

    /// @notice Removes a list of routers from the whitelisted addresses
    /// @param _addresses The list of addresses that should be depricated
    function removeMultichainRouters(address[] calldata _addresses) external onlyOwner {
        for (uint i = 0; i < _addresses.length; i++) {
            delete multichainRouters[_addresses[i]];
        }

        emit MultichainRoutersRemoved(_addresses);
    }

    /// @inheritdoc IRangoMultichain
    function multichainBridge(
        RangoMultichainModels.MultichainBridgeType _actionType,
        address _fromToken,
        address _underlyingToken,
        uint _inputAmount,
        address _multichainRouter,
        address _receiverAddress,
        uint _receiverChainID
    ) external override payable whenNotPaused nonReentrant {
        require(multichainRouters[_multichainRouter], 'Requested router address not whitelisted');
        if (_actionType == RangoMultichainModels.MultichainBridgeType.OUT_NATIVE) {
            require(msg.value >= _inputAmount, 'Insufficient ETH sent for OUT_NATIVE action');
            require(_fromToken == NULL_ADDRESS, 'Invalid _fromToken, it must be equal to null address');
        }

        if (_actionType != RangoMultichainModels.MultichainBridgeType.OUT_NATIVE) {
            SafeERC20.safeTransferFrom(IERC20(_fromToken), msg.sender, address(this), _inputAmount);
            approve(_fromToken, _multichainRouter, _inputAmount);
        }

        MultichainRouter router = MultichainRouter(_multichainRouter);

        if (_actionType == RangoMultichainModels.MultichainBridgeType.OUT) {
            router.anySwapOut(_underlyingToken, _receiverAddress, _inputAmount, _receiverChainID);
        } else if (_actionType == RangoMultichainModels.MultichainBridgeType.OUT_UNDERLYING) {
            router.anySwapOutUnderlying(_underlyingToken, _receiverAddress, _inputAmount, _receiverChainID);
        } else if (_actionType == RangoMultichainModels.MultichainBridgeType.OUT_NATIVE) {
            router.anySwapOutNative{value: msg.value}(_underlyingToken, _receiverAddress, _receiverChainID);
        } else {
            revert();
        }

        emit MultichainBridge(_actionType, _fromToken, _underlyingToken, _inputAmount, _multichainRouter, _receiverAddress, _receiverChainID);
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;

import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/security/Pausable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "../../interfaces/IWETH.sol";
import "../../interfaces/IThorchainRouter.sol";
import "../../interfaces/IRangoMessageReceiver.sol";


/// @title The base contract for the non-TransparentProxy based contracts
/// @notice It supports refund and DEX whitelisting
/// @author Uchiha Sasuke
/// @notice It contains storage for whitelisted contracts, refund ERC20 and native tokens and on-chain swap
contract BaseContract is Pausable, Ownable, ReentrancyGuard {
    address payable constant NULL_ADDRESS = payable(0x0000000000000000000000000000000000000000);

    using SafeMath for uint;

    /// @dev keccak256("exchange.rango.basecontract")
    bytes32 internal constant BASE_CONTRACT_NAMESPACE = hex"4c641b369cb23edb735ebedf93a426da9d88d71734c5e7d6076697dcf08d6878";

    struct BaseContractStorage {
        address nativeWrappedAddress;
        mapping (address => bool) whitelistContracts;
        mapping (address => bool) whitelistMessagingContracts;
    }

    /// @notice The output money (ERC20/Native) is sent to a wallet
    /// @param _token The token that is sent to a wallet, ZERO address for native
    /// @param _amount The sent amount
    /// @param _receiver The receiver wallet address
    /// @param _nativeOut means the output was native token
    /// @param _withdraw If true, indicates that we swapped WETH to ETH before sending the money and _nativeOut is also true
    event SendToken(address _token, uint256 _amount, address _receiver, bool _nativeOut, bool _withdraw);

    /// @notice This event indicates that a dApp used Rango messaging (dAppMessage field) and we delivered the message to it
    /// @param _receiverContract The address of dApp's contract that was called
    /// @param _token The address of the token that is sent to the dApp, NULL_ADDRESS for native token
    /// @param _amount The amount of the token sent to them
    /// @param _status The status of operation, informing the dApp that the whole process was a success or refund
    /// @param _appMessage The custom message that the dApp asked Rango to deliver
    /// @param success Indicates that the function call to the dApp encountered error or not
    /// @param failReason If success = false, failReason will be the string reason of the failure (aka message of require)
    event CrossChainMessageCalled(
        address _receiverContract,
        address _token,
        uint _amount,
        IRangoMessageReceiver.ProcessStatus _status,
        bytes _appMessage,
        bool success,
        string failReason
    );

    /// @notice Notifies that a new contract is whitelisted
    /// @param _factory The address of the contract
    /// @param _isMessagingDApp If true the whitelisted contract is a dApp based on Rango messaging dApp, otherwise it's a dex or dex aggregator
    event ContractWhitelisted(address _factory, bool _isMessagingDApp);

    /// @notice Notifies that a new contract is blacklisted
    /// @param _factory The address of the contract
    /// @param _isMessagingDApp If true the whitelisted contract is a dApp based on Rango messaging dApp, otherwise it's a dex or dex aggregator
    event ContractBlacklisted(address _factory, bool _isMessagingDApp);

    /// @notice Notifies that admin manually refunded some money
    /// @param _token The address of refunded token, 0x000..00 address for native token
    /// @param _amount The amount that is refunded
    event Refunded(address _token, uint _amount);

    /// @notice Adds a contract to the whitelisted DEXes or whitelisted messaging dApps that can be called
    /// @param _factory The address of the DEX or dApp
    /// @param isMessagingDApp Is true for dApps and false for DEX
    function addWhitelist(address _factory, bool isMessagingDApp) external onlyOwner {
        BaseContractStorage storage baseStorage = getBaseContractStorage();
        if (isMessagingDApp)
            baseStorage.whitelistMessagingContracts[_factory] = true;
        else
            baseStorage.whitelistContracts[_factory] = true;

        emit ContractWhitelisted(_factory, isMessagingDApp);
    }

    /// @notice Removes a contract from the whitelisted DEXes or dApps that can be called
    /// @param _factory The address of the DEX or dApp
    /// @param isMessagingDApp Is true for dApps and false for DEX
    function removeWhitelist(address _factory, bool isMessagingDApp) external onlyOwner {
        BaseContractStorage storage baseStorage = getBaseContractStorage();

        if (isMessagingDApp) {
            require(baseStorage.whitelistMessagingContracts[_factory], 'Factory not found');
            delete baseStorage.whitelistMessagingContracts[_factory];
        } else {
            require(baseStorage.whitelistContracts[_factory], 'Factory not found');
            delete baseStorage.whitelistContracts[_factory];
        }

        emit ContractBlacklisted(_factory, isMessagingDApp);
    }

    /// @notice Transfers an ERC20 token from this contract to msg.sender
    /// @dev This endpoint is to return money to a user if we didn't handle failure correctly and the money is still in the contract
    /// @dev Currently the money goes to admin and they should manually transfer it to a wallet later
    /// @param _tokenAddress The address of ERC20 token to be transferred
    /// @param _amount The amount of money that should be transfered
    function refund(address _tokenAddress, uint256 _amount) external onlyOwner {
        IERC20 ercToken = IERC20(_tokenAddress);
        uint balance = ercToken.balanceOf(address(this));
        require(balance >= _amount, 'Insufficient balance');

        SafeERC20.safeTransfer(IERC20(_tokenAddress), msg.sender, _amount);
        emit Refunded(_tokenAddress, _amount);
    }

    /// @notice Transfers the native token from this contract to msg.sender
    /// @dev This endpoint is to return money to a user if we didn't handle failure correctly and the money is still in the contract
    /// @dev Currently the money goes to admin and they should manually transfer it to a wallet later
    /// @param _amount The amount of native token that should be transfered
    function refundNative(uint256 _amount) external onlyOwner {
        uint balance = address(this).balance;
        require(balance >= _amount, 'Insufficient balance');

        _sendToken(
            NULL_ADDRESS,
            _amount,
            msg.sender,
            true,
            false,
            new bytes(0),
            NULL_ADDRESS,
            IRangoMessageReceiver.ProcessStatus.SUCCESS
        );

        emit Refunded(NULL_ADDRESS, _amount);
    }

    /// @notice Approves an ERC20 token to a contract to transfer from the current contract
    /// @param token The address of an ERC20 token
    /// @param to The contract address that should be approved
    /// @param value The amount that should be approved
    function approve(address token, address to, uint value) internal {
        SafeERC20.safeApprove(IERC20(token), to, 0);
        SafeERC20.safeIncreaseAllowance(IERC20(token), to, value);
    }

    /// @notice An internal function to send a token from the current contract to another contract or wallet
    /// @dev This function also can convert WETH to ETH before sending if _withdraw flat is set to true
    /// @dev To send native token _nativeOut param should be set to true, otherwise we assume it's an ERC20 transfer
    /// @dev If there is a message from a dApp it sends the money to the contract instead of the end-user and calls its handleRangoMessage
    /// @param _token The token that is going to be sent to a wallet, ZERO address for native
    /// @param _amount The sent amount
    /// @param _receiver The receiver wallet address or contract
    /// @param _nativeOut means the output is native token
    /// @param _withdraw If true, indicates that we should swap WETH to ETH before sending the money and _nativeOut must also be true
    function _sendToken(
        address _token,
        uint256 _amount,
        address _receiver,
        bool _nativeOut,
        bool _withdraw,
        bytes memory _dAppMessage,
        address _dAppReceiverContract,
        IRangoMessageReceiver.ProcessStatus processStatus
    ) internal {
        bool thereIsAMessage = _dAppReceiverContract != NULL_ADDRESS;
        address immediateReceiver = thereIsAMessage ? _dAppReceiverContract : _receiver;
        BaseContractStorage storage baseStorage = getBaseContractStorage();
        emit SendToken(_token, _amount, immediateReceiver, _nativeOut, _withdraw);

        if (_nativeOut) {
            if (_withdraw) {
                require(_token == baseStorage.nativeWrappedAddress, "token mismatch");
                IWETH(baseStorage.nativeWrappedAddress).withdraw(_amount);
            }
            _sendNative(immediateReceiver, _amount);
        } else {
            SafeERC20.safeTransfer(IERC20(_token), immediateReceiver, _amount);
        }

        if (thereIsAMessage) {
            require(
                baseStorage.whitelistMessagingContracts[_dAppReceiverContract],
                "Third-party message handler contract not whitelisted"
            );

            address receivedToken = _nativeOut ? NULL_ADDRESS : _token;
            try IRangoMessageReceiver(_dAppReceiverContract)
                .handleRangoMessage(receivedToken, _amount, processStatus, _dAppMessage)
            {
                emit CrossChainMessageCalled(_dAppReceiverContract, receivedToken, _amount, processStatus, _dAppMessage, true, "");
            } catch Error(string memory reason) {
                emit CrossChainMessageCalled(_dAppReceiverContract, receivedToken, _amount, processStatus, _dAppMessage, false, reason);
            } catch (bytes memory lowLevelData) {
                emit CrossChainMessageCalled(_dAppReceiverContract, receivedToken, _amount, processStatus, _dAppMessage, false, _getRevertMsg(lowLevelData));
            }
        }
    }

    /// @notice An internal function to send native token to a contract or wallet
    /// @param _receiver The address that will receive the native token
    /// @param _amount The amount of the native token that should be sent
    function _sendNative(address _receiver, uint _amount) internal {
        (bool sent, ) = _receiver.call{value: _amount}("");
        require(sent, "failed to send native");
    }

    /// @notice A utility function to fetch storage from a predefined random slot using assembly
    /// @return s The storage object
    function getBaseContractStorage() internal pure returns (BaseContractStorage storage s) {
        bytes32 namespace = BASE_CONTRACT_NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            s.slot := namespace
        }
    }

    /// @notice To extract revert message from a DEX/contract call to represent to the end-user in the blockchain
    /// @param _returnData The resulting bytes of a failed call to a DEX or contract
    /// @return A string that describes what was the error
    function _getRevertMsg(bytes memory _returnData) internal pure returns (string memory) {
        // If the _res length is less than 68, then the transaction failed silently (without a revert message)
        if (_returnData.length < 68) return 'Transaction reverted silently';

        assembly {
        // Slice the sighash.
            _returnData := add(_returnData, 0x04)
        }
        return abi.decode(_returnData, (string)); // All that remains is the revert string
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;

import "../../../bridges/multichain/RangoMultichainModels.sol";

/// @title An interface to RangoMultichain.sol contract to improve type hinting
/// @author Uchiha Sasuke
interface IRangoMultichain {

    /// @notice Executes a MultichainOrg bridge call
    /// @param _actionType The type of bridge action which indicates the name of the function of MultichainOrg contract to be called
    /// @param _fromToken The address of bridging token
    /// @param _underlyingToken For _actionType = OUT_UNDERLYING, it's the address of the underlying token
    /// @param _inputAmount The amount of the token to be bridged
    /// @param multichainRouter Address of MultichainOrg contract on the current chain
    /// @param _receiverAddress The address of end-user on the destination
    /// @param _receiverChainID The network id of destination chain
    function multichainBridge(
        RangoMultichainModels.MultichainBridgeType _actionType,
        address _fromToken,
        address _underlyingToken,
        uint _inputAmount,
        address multichainRouter,
        address _receiverAddress,
        uint _receiverChainID
    ) external payable;

}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;

library RangoMultichainModels {
    enum MultichainBridgeType { OUT, OUT_UNDERLYING, OUT_NATIVE }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;

/// @title The root contract that handles Rango's interaction with MultichainOrg bridge
/// @author Uchiha Sasuke
/// @dev This is deployed as a separate contract from RangoV1
interface MultichainRouter {
    function anySwapOutUnderlying(address token, address to, uint amount, uint toChainID) external;
    function anySwapOutNative(address token, address to, uint toChainID) external payable;
    function anySwapOut(address token, address to, uint amount, uint toChainID) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = _setInitializedVersion(1);
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        bool isTopLevelCall = _setInitializedVersion(version);
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(version);
        }
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        _setInitializedVersion(type(uint8).max);
    }

    function _setInitializedVersion(uint8 version) private returns (bool) {
        // If the contract is initializing we ignore whether _initialized is set in order to support multiple
        // inheritance patterns, but we only do this in the context of a constructor, and for the lowest level
        // of initializers, because in other contexts the contract may have been reentered.
        if (_initializing) {
            require(
                version == 1 && !AddressUpgradeable.isContract(address(this)),
                "Initializable: contract is already initialized"
            );
            return false;
        } else {
            require(_initialized < version, "Initializable: contract is already initialized");
            _initialized = version;
            return true;
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.13;

interface IWETH {
    function deposit() external payable;

    function withdraw(uint256) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

/// @dev based on thorchain router https://gitlab.com/thorchain/ethereum/eth-router/-/blob/29b59c2d6c6fc7a65d6bbc0f80d90694ac4122f8/contracts/THORChain_Aggregator.sol#L12
interface IThorchainRouter {
    /// @param vault The vault address of Thorchain. This cannot be hardcoded because Thorchain rotates vaults.
    /// @param asset The token contract address (if token is native, should be 0x0000000000000000000000000000000000000000)
    /// @param amount The amount of token to be swapped. It should be positive and if token is native, msg.value should be bigger than amount.
    /// @param memo The transaction memo used by Thorchain which contains the thorchain swap data. More info: https://dev.thorchain.org/thorchain-dev/memos
    /// @param expiration The expiration block number. If the tx is included after this block, it will be reverted.
    function depositWithExpiry(
        address payable vault,
        address asset,
        uint amount,
        string calldata memo,
        uint expiration
    ) external payable;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;

interface IRangoMessageReceiver {
    enum ProcessStatus { SUCCESS, REFUND_IN_SOURCE, REFUND_IN_DESTINATION }

    function handleRangoMessage(
        address _token,
        uint _amount,
        ProcessStatus _status,
        bytes memory _message
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_nativeWrappedAddress","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_factory","type":"address"},{"indexed":false,"internalType":"bool","name":"_isMessagingDApp","type":"bool"}],"name":"ContractBlacklisted","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_factory","type":"address"},{"indexed":false,"internalType":"bool","name":"_isMessagingDApp","type":"bool"}],"name":"ContractWhitelisted","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_receiverContract","type":"address"},{"indexed":false,"internalType":"address","name":"_token","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"},{"indexed":false,"internalType":"enum IRangoMessageReceiver.ProcessStatus","name":"_status","type":"uint8"},{"indexed":false,"internalType":"bytes","name":"_appMessage","type":"bytes"},{"indexed":false,"internalType":"bool","name":"success","type":"bool"},{"indexed":false,"internalType":"string","name":"failReason","type":"string"}],"name":"CrossChainMessageCalled","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"enum RangoMultichainModels.MultichainBridgeType","name":"_actionType","type":"uint8"},{"indexed":false,"internalType":"address","name":"_fromToken","type":"address"},{"indexed":false,"internalType":"address","name":"_underlyingToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"_inputAmount","type":"uint256"},{"indexed":false,"internalType":"address","name":"multichainRouter","type":"address"},{"indexed":false,"internalType":"address","name":"_receiverAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"_receiverChainID","type":"uint256"}],"name":"MultichainBridge","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address[]","name":"_addresses","type":"address[]"}],"name":"MultichainRoutersAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address[]","name":"_addresses","type":"address[]"}],"name":"MultichainRoutersRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_token","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"Refunded","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_token","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"},{"indexed":false,"internalType":"address","name":"_receiver","type":"address"},{"indexed":false,"internalType":"bool","name":"_nativeOut","type":"bool"},{"indexed":false,"internalType":"bool","name":"_withdraw","type":"bool"}],"name":"SendToken","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[{"internalType":"address[]","name":"_addresses","type":"address[]"}],"name":"addMultichainRouters","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_factory","type":"address"},{"internalType":"bool","name":"isMessagingDApp","type":"bool"}],"name":"addWhitelist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"enum RangoMultichainModels.MultichainBridgeType","name":"_actionType","type":"uint8"},{"internalType":"address","name":"_fromToken","type":"address"},{"internalType":"address","name":"_underlyingToken","type":"address"},{"internalType":"uint256","name":"_inputAmount","type":"uint256"},{"internalType":"address","name":"_multichainRouter","type":"address"},{"internalType":"address","name":"_receiverAddress","type":"address"},{"internalType":"uint256","name":"_receiverChainID","type":"uint256"}],"name":"multichainBridge","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"multichainRouters","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_tokenAddress","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"refund","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"refundNative","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"_addresses","type":"address[]"}],"name":"removeMultichainRouters","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_factory","type":"address"},{"internalType":"bool","name":"isMessagingDApp","type":"bool"}],"name":"removeWhitelist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

000000000000000000000000deaddeaddeaddeaddeaddeaddeaddeaddead0000

-----Decoded View---------------
Arg [0] : _nativeWrappedAddress (address): 0xdeaddeaddeaddeaddeaddeaddeaddeaddead0000

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000deaddeaddeaddeaddeaddeaddeaddeaddead0000